Computer Labs & Multimedia Spaces
Only available during open library hours, each space has access to Wi-Fi. The library features three computer labs and one design lab: two administered by the Information Technology department, and one by the library, respectively. Each room has a printer available.
Rooms can only be reserved by current Rollins faculty, staff, and students. Most of these spaces can be booked through the Rollins Scheduling and Event Services through Virtual EMS. If you need help reserving a room, please contact our Office & Facilities Coordinator by emailing olinOFC@rollins.edu.
Center for Creativity (Mac Lab)
Room 220 on the 2nd floor (main level)
Formerly known as the Multimedia Lab, this lab is equipped with:
- 3 screens for display from the instructor's station
- 24 iMac computers with movable screens
- Whiteboard wall (the entire front wall)
- 1 Toshiba Color printer
Administered by IT. Contact IT for any information regarding this lab.
Teaching Lab (PC Lab)
Room 225 on the 2nd floor (main level)
This lab is equipped with:
- 2 Display screens
- 34 Lenovo m900 Computers
- 1 Toshiba Color Printer
Administered by IT. Contact IT for any information regarding this lab.
Open Computer Lab (PC Lab)
In Research Support on the 2nd floor (main level)
This space contains a bank of computers in the lobby and cannot be reserved.
Administered by the library.
Multimedia Spaces
Microfilm Reader Station
On the 1st floor (lower level)
Cannot be reserved. Priority use of this space and the computer is for patrons using the microform reader.
The Olin Library has a collection of materials on microform. These materials can be read, saved as multiple file formats (including .jpg, .png, .pdf), and printed via our microform reader and workstation located on the first floor of the library, right in front of the Grover Room.
The microform is kept on the first floor in the microform area and in the Archives. If you need help finding or using these materials, library employees are here to assist you.
Print requests sent from the microform room are sent to the research support area printer on the second floor. You will need to release your print job from the laptop release station as usual.
Please note that any documents saved to the microform computer will be deleted by our security software when you log off. Make sure to save your scans to a flash drive, an external source, a cloud service, or you can email them directly to yourself.